Loading ...
Loading ...
Loading ...
12 ASSEMBLY INSTRUCTIONS FOR TROLLEY
2) Fit The Rotating Castors
Fit the rotating castors into the holes in the bottom of the
base� Again, use only two Allen head screws, washers and
nuts for each castor in the positions shown�
Spanner/wrench tighten immediately�
3) Fit The Right And Left Side Panels
Use 5 Allen head screws, washers and nuts on each panel�
You may find it easier to lay the cart on its side for this step�
Only hand tighten at this stage - You will wrench/spanner
tighten at a later step�
The right side has holes
for the gas hose
ASSEMBLY INSTRUCTIONS FOR TROLLEY
4) Fit The Magnets To The Cross Brace
Hold the cross brace so the folded tabs are facing towards
you� Push the magnets into place so the magnetic side is
facing you�
Steel is folded up
towards you
5) Fit The Front Cross Brace
Use 4 Allen head screws, washers and nuts� Ensure the
magnets are towards the bottom and the folded tabs are
facing outwards�
The cross brace “wraps around” the side panels, to bring
them closer together, as shown in the inset�
Hand tighten only at this stage�
Loading ...
Loading ...
Loading ...