Loading ...
Loading ...
Loading ...
14 ASSEMBLY INSTRUCTIONS FOR TROLLEY
11) Fit The Infill Panel (5 burner models only)
5 burner models require an infill panel between the two
doors� Use 4 Allen head screws, washers and nuts to secure
the panel between the front cross brace and the base plate�
Hand tighten only at this stage�
12) Fit The Doors
Support the door rod from underneath, slip the top of the
rod into the hole in the cross brace, and allow the bottom of
the rod to fall into the hole in the base plate�
You should now wrench/spanner tighten the infill panel if
one has been fitted�
Isometric view
Scale: 1:5
Isometric view
Scale: 1:5
ASSEMBLY INSTRUCTIONS FOR TROLLEY
13) Fit The Internal Condiment Racks
These fit directly into the key holes on the inside of
the doors�
Isometric view
Scale: 1:5
14) Fit The Storage Racks
If you purchased any optional storage racks, they slide easily
into the holes on the right or left side panel�
Isometric view
Scale: 1:5
15) Fit The Hose Protector
Squeeze the rubber hose protector and fit it into one of the
holes in the side panel� You have a choice as to which hole
you use:
If you intend to use bottled gas, you should use the hole in
the side as shown�
If you will be using piped gas, then your gas plumber may
prefer it at the rear of the barbecue�
Isometric view
Scale: 1:5
Loading ...
Loading ...
Loading ...