Loading ...
Loading ...
Loading ...
6) Fit The Lower Back Panel
Both back panels are identical�
Screw one of the back panels to the base and side panels
using 7 Allen head screws, washers and nuts�
Hand tighten only at this stage�
7) Fit The Upper Back Panel
Screw the other back panel to the side panels� Use only
one Allen head screw, washer and nut on each side, in the
uppermost hole�
Hand tighten only at this stage�
8) Fit The Towel Rack
If you purchased the optional towel rack, you can attach it to
either the right or left side panel�
First, unscrew and remove the plastic end caps from the
towel rack� Then, using 2 countersunk screws, washers and
nuts, attach the towel rack to the side panel�
You may need to slide the towel rails out of the way to
access the screw holes�
Tighten immediately�
13ASSEMBLY INSTRUCTIONS FOR TROLLEY
9) Fit The Left Side Shelf
Use 4 Allen head screws, nuts and washers� Get in
underneath the side shelf and screw the shelf to the side
panel� The screws go into the slotted holes as shown�
If you have a second side shelf you should fit it at this point,
only for lower shelves, the screws go in the round holes at
the side�
All side shelves should be tightened immediately�
10) Fit The Top Enclosure Panel
The front of the enclosure panel sits neatly on the front
cross brace� The back of the panel screws into both the
upper back panel and the side panel� Use two Allen head
screws, washers and nuts�
Hand tighten only at this stage�
ASSEMBLY INSTRUCTIONS FOR TROLLEY
You can fit the towel rack to either
the left or right side panel.
Loading ...
Loading ...
Loading ...