Loading ...
Loading ...
Loading ...
SPARK PLUG REMOVAL AND REPLACEMENT
1. Remove the spark plug cap
q
.
2. Using the spark plug wrench
provided in the tool kit, remove the
plug by rotating it counter-
clockwise.
3. Reverse the procedure for spark
plug installation. Torque to
specification.
CONSTANT VARIABLE TRANSMISSION
(CVT) SYSTEM
WARNING
Failure to comply with the instructions in this warning can result in severe injury
or death.
Do not modify any component of the CVT system. Doing so may reduce its
strength so that a failure may occur at a high speed. The CVT system has been
precision balanced. Any modification will cause the system to be out of
balance, creating vibration and additional loads on components.
• Always follow all recommended maintenance procedures. See your
POLARIS dealer, or other qualified person, for service and repair
assistance.
• This CVT system is intended for use on POLARIS products only. Do not
install it in any other product.
• Always make sure the CVT housing is securely in place during operation.
CVT DRYING
NOTE
After operating in water, the vehicle’s CVT system should be checked
immediately. Use the following instructions to dry it out before operating.
85
MAINTENANCE
Loading ...
Loading ...
Loading ...