Loading ...
Loading ...
Loading ...
TIP
The position of the shoulder strap can be adjusted to the height of the operator.
Have an adult relocate the mounting bolt
q
to a different position, making sure
the nut and bolt are tightened securely.
TORQUE
Seat Belt Mounting Bolt:
30 ft-lbs (40.6 Nm)
SEAT BELT INSPECTION
Inspect all seat belts for proper operation before each use of the vehicle.
1. Push the latch plate into the buckle until it clicks. The latch plate must slide
smoothly into the buckle. A click indicates that it's securely latched.
2. Push the red release latch in the middle of the buckle to make sure it
releases freely.
3. Pull each seat belt completely out and inspect the full length for any damage,
including cuts, wear, fraying or stiffness. If any damage is found, or if the seat
belt does not operate properly, have the seat belt system checked and/or
replaced by an authorized dealer.
4. To clean dirt or debris from the seat belts, sponge the straps with mild soap
and water. Do not use bleach, dye or household detergents.
CAB NETS
Riding in this vehicle without using the cab nets increases the risk of serious
injury or death in the event of an accident or rollover.
Cab nets must be used by both operator and passenger at all times. Make sure
all latches are secure before operating the vehicle.
Always inspect cab nets for tightness, wear and damage before each use of the
vehicle. Use the strap adjusters to tighten any loose straps. Promptly replace
worn or damaged cab nets with new cab nets, available from your authorized
POLARIS dealer.
28
FEATURES AND CONTROLS
Loading ...
Loading ...
Loading ...