Loading ...
Loading ...
Loading ...
BATTERY STORAGE
Whenever the vehicle is not used for a period of three months or more, remove
the battery from the vehicle, ensure that it's fully charged, and store it out of the
sun in a cool, dry place. Check battery voltage each month during storage and
recharge as needed to maintain a full charge.
TIP
Battery charge can be maintained by using a POLARIS Battery Tender charger
or by charging about once a month to make up for normal self discharge.
Battery Tender can be left connected during the storage period, and will
automatically charge the battery if the voltage drops below a predetermined
point.
BATTERY CHARGING (CONVENTIONAL BATTERY)
1. Remove the battery from the vehicle to prevent damage from leaking or
spilled electrolyte during charging.
2. Charge the battery with a charging output no larger than 1/10 of the battery’s
amp/hr rating. Charge as needed to raise the specific gravity to 1.270 or
greater.
3. Reinstall the battery. Make sure the positive terminal is toward the front of the
vehicle.
BATTERY CHARGING (SEALED BATTERY)
The following battery charging instructions apply only to the installation of a
sealed battery. Read all instructions before proceeding with the installation of
this battery.
The sealed battery is already filled with electrolyte and has been sealed and fully
charged at the factory. Never pry the sealing strip off or add any other fluid to this
battery.
The single most important thing about maintaining a sealed battery is to keep it
fully charged. Since the battery is sealed and the sealing strip cannot be
removed, you must use a voltmeter or multimeter to measure DC voltage.
WARNING
An overheated battery may explode, causing severe injury or death. Always
watch charging times carefully. Stop charging if the battery becomes very
warm to the touch. Allow it to cool before resuming charging.
For a refresh charge, follow all instructions carefully.
100
MAINTENANCE
Loading ...
Loading ...
Loading ...