Loading ...
Loading ...
Loading ...
7Installation
Installation Dimensions
24"
(61cm)
21 3/4"
(55.2cm)
Water
Valve
5"
(12.7cm)
33 5/8"
(85.4cm)
Adjustable
to 34 3/4"
(88.3cm)
Water
Drain
Water
Outlet
14 7/8"
(37.8cm)
Figure 3
Factory Installed Drain Pump
This pump is designed to remove drain water from ice machines installed in areas without
direct drainage access. The sealed reservoir pump collects the melted ice water and pumps
it to a maximum lift of eight feet (2.44 meters) through 3⁄8” I.D. vinyl tubing to a drain.
The discharge tubing is coiled up and attached to the back of the ice machine. The 3⁄8
inch I.D. tubing needs to be plumbed and connected to a sanitary sewer (Figure 4).
CAUTION
This drain pump is designed to be
installed in Electrolux ice machines
only and has been evaluated for use
with water only. Drain line vertical rise
is not to exceed 8 feet and total drain
line length is not to exceed 20 feet;
otherwise, the ice machine may not
operate correctly.
WARNING
Electrical Shock Hazard
Risk of electrical shock or personal injury
could occur due to moving components,
if the machine compartment access
cover is removed before unplugging the
ice machine power cord.
Figure 4
Drain line coiled and
secured to the back of the
cabinet. Uncoil, route to
an appropriate drain and
cut to length.
Drain pump
vent tube. Keep
this open to assure
air ows freely as
water enters the
pump reservoir.
Loading ...
Loading ...
Loading ...