Loading ...
Loading ...
Loading ...
Steering wheel controls
These operate with the side lights and
the dipped beam headlamps.
To switch off the front and rear fog lights,
turn the ring rearwards twice in succession.
In clear weather or in rain, both day
and night, rear fog lights dazzle and
are prohibited.
Do not forget to switch them off when they
are no longer needed.
Automatic switching on of the lights switches
off the rear fog lamps, but the front fog
lamps remain on.
Daytime lights*
On vehicles which are equipped
with daytime lights, the dipped
headlamps come on when the
vehicle is started.
This warning light comes on on the
instrument panel.
The instruments and controls (instrument
panel, multifunction display, air conditioning
control panel, ...) are only lit on switching to
the automatic switching on of the lights mode
or when the lights are switched on manually.
* According to country.
In foggy weather or in snow, the
brightness sensor can detect sufficient
light. As a consequence, the lights will not
come on automatically.
Automatic "Follow-Me-Home"
lighting
With the ignition off, when you leave your
vehicle with the automatic switching on
of the lights function activated, the side
lights and dipped headlamps remain on for
the selected duration.
Automatic switching on of the lights
Side lights and dipped beam headlamps
switch on automatically if the light is poor,
or during operation of the windscreen
wipers. They switch off as soon as the light
becomes bright enough or the windscreen
wipers stop.
To switch the function on or off,
use the display configuration
menu.
Carry out these operations while
the vehicle is stationary.
Activation
The activation of this function is
accompanied by a message on the display.
The function is activated when the manual
lights stalk is in position 0.
Deactivation
The deactivation of this function is
accompanied by a message on the display.
The function is deactivated temporarily when
you use the manual lights stalk.
Direction indicators
(green flashing)
Left: downwards.
Right: upwards.
Do not cover the brightness sensor
located in the centre of the fascia. It is
used for the automatic switching on of the
lights.
To deactivate or activate this
function, go to the display
configuration menu.
The duration of the timed period must also
be set (15, 30, 60 seconds), via the display
configuration menu.
Carry out these operations when the vehicle
is stationary.
Cancelling:
"flash" the headlamps,
get out of the vehicle and lock it.
34
If the brightness sensor does not
function correctly, the lights come on
accompanied by the service warning light,
an audible signal and a message on the
display.
Contact a PEUGEOT dealer.
Loading ...
Loading ...
Loading ...