Loading ...
Loading ...
Loading ...
Gearboxes
It is only possible to change from one
gear to another if the vehicle speed
and engine speed permit. If they do not, the
vehicle will operate temporarily in automatic
mode.
When the vehicle is stationary or moving
very slowly, the gearbox automatically
selects gear M1.
The (snow) programme does not operate
in manual mode.
MANUAL GEARBOX
Reverse*
To change to reverse gear, lift the ring under
the gear lever knob and push the gear lever
to the left then to the front.
Reverse gear can only be engaged when
the vehicle is stationary with the engine
idling.
You can return to the auto-adaptive
programme at any time.
Press button again to switch off the
programme you are in.
Manual operation
Manual changing of the four gears:
select position M in the gate,
push the lever to the + sign to change to a
higher gear,
pull the lever to the - sign to change to a
lower gear.
You can change from position D (driving in
automatic mode) to position M (driving in
manual mode) at any time.
Operating abnormality
Any operating abnormality is indicated by an
audible signal, accompanied by the
message "Automatic gear fault" on the
display and flashing of the Snow warning
light on the instrument panel.
In this situation the gearbox operates in
downgrade mode (locked in 3rd gear). You
may feel a substantial knock when
changing from P to R and from N to R (this
will not cause any damage to the gearbox).
Do not exceed 60 mph (100 km/h), keeping
within the limit of local speed restrictions.
Contact a PEUGEOT dealer as soon as
possible.
* According to engine.
32
Loading ...
Loading ...
Loading ...