Loading ...
Loading ...
Loading ...
Seat belts
The upper part must be positioned in the
hollow of the shoulder.
The inertia reels are fitted with a device
which automatically locks the strap in the
event of a collision or emergency braking.
You can release the device by pulling the
strap sharply and releasing it.
In order to be effective, a seat belt:
must be tightened as close to the body as
possible,
must restrain one adult only,
must not bear any trace of cuts or fraying,
must be pulled in front of you with a
smooth movement, checking that it does
not twist,
must not be transformed or modified to
avoid altering its performance.
In accordance with current safety
regulations, all work and checks must be
carried out by a PEUGEOT dealer who
guarantees the standard of the work.
Have your seat belts checked regularly by a
PEUGEOT dealer, particularly if the straps
show signs of damage.
Clean the seat belt straps with soapy
water or a textile cleaning product, sold by
PEUGEOT dealers.
After folding or moving a seat or rear bench
seat, ensure that the seat belt is positioned
and rolled up correctly.
Recommendations for children:
use a suitable child seat if the passenger
is less than 12 years old or shorter than
one metre fifty.
never use the same seat belt to restrain
more than one person,
never allow a child to travel on your lap.
Depending on the nature and seriousness
of the impacts, the pre-tensioning device
may be triggered before and independently
of the air bags.
In all cases, the air bag warning light comes on.
Following an impact, however minor, or if
the straps show signs of wear, have the
seat belts system checked, and if necessary
replaced, by a PEUGEOT dealer.
* According to model.
116
Wherever you are seated in the
vehicle, always fasten your seat belt,
even for short journeys.
Do not invert the seat belt buckles as they
will not fulfil their role fully.
If the seats have armrests*, the lap part of
the seat belt must always pass under the
armrest.
The seat belts are fitted with an inertia reel
which automatically adjusts the length of the
strap to your size. The seat belt is stored
automatically when not in use.
Before and after use, ensure that the seat
belt is rolled up correctly.
The lower part of the strap must be
positioned as low as possible on the pelvis.
To install the seat belt, move the spring hook
into position to insert it into the stalk.
2nd and 3rd row rear centre seat
belts
The 2nd row rear centre seat and the rear
bench seat centre seat have an integrated
three-point inertia reel seat belt.
Loading ...
Loading ...
Loading ...