Loading ...
Loading ...
Loading ...
Instruments and controls
This comes on for a few seconds each
time the ignition is switched on. If the
warning light remains on or comes on while
the engine is running, accompanied by
an audible signal and a message on the
display, it indicates one of the following:
- an engine immobiliser system fault,
- an engine management system fault,
- a rear parking assistance system fault,
- an automatic switching on of the lights
system and rain sensor fault,
- a tyre under-inflation detection system
warning,
- a brake pad wear warning,
- a flat remote control battery,
- one or more doors open at a vehicle speed
above 6 mph (10 km/h),
- a lack of engine oil.
To consult the corresponding warning
message, refer to "Warning log".
Service
This comes on for a few seconds each time
the ignition is switched on.
If it remains on or comes on above 8 mph
(12 km/h), it indicates a malfunction of the
ABS.
However, the vehicle retains conventional
servo-assisted braking.
Illumination of this warning light is
accompanied by an audible signal and the
message "ABS fault" on the display.
Contact a PEUGEOT dealer.
Anti-lock braking system
(ABS)
This comes on for a few seconds each time
the ignition is switched on.
It flashes when the system is activated
and is lit continuously when the system is
switched off.
If it remains on or comes on with the
engine running and the vehicle moving, it is
accompanied by an audible signal and the
message "ESP/ASR not functioning" on
the display.
Contact a PEUGEOT dealer.
Dynamic stability control (ESP/
ASR)
This comes on for a few seconds each time
the ignition is switched on.
It is linked to the "engine oil pressure",
"brake fluid level", "electronic brake force
distribution fault" and "power steering fault"
warning lights, the coolant temperature
gauge and the puncture warnings, indicated
by a message on the display.
Stop immediately.
Contact a PEUGEOT dealer.
Central STOP warning
This is linked to the central STOP warning light.
If it comes on with the engine running, it is
accompanied by an audible signal and the
message "Oil pressure insufficient" on the
display.
Stop immediately. Contact a PEUGEOT dealer
without delay.
Park and switch off your engine. Allow the
lubricating circuit to cool in order to check its level
and in the case of a lack of oil, top up the level
with the engine cold.
For further information regarding the oil level,
refer to the "Checking the levels" section of the
"Maintenance" chapter.
Engine oil pressure
22
Loading ...
Loading ...
Loading ...