Loading ...
Loading ...
Loading ...
WARNING
Improperly lifting your vehicle with a workshop hoist or a floor jack can cause the vehicle to
fall off and cause serious personal injury.
Always read and heed the operating instructions from the floor jack manufacturer and
legal regulations if necessary before using the floor jack to lift the vehicle.
Never let anyone stay in the vehicle when it is being lifted or when it is off the ground.
Always lift your vehicle only at the designated lift points shown in the illustrations
⇒ fig. 161 and ⇒ fig. 162. Not using the designated lift points can cause the vehicle to fall off
the floor jack when heavy parts such as the engine or transmission are removed.
Always make sure that the vehicle's lift points lie as flat as possible and centered on the
carrier plates of the floor jack.
Never start the engine when you have raised the vehicle on the floor jack. The engine
vibrations and vehicle movements could knock the vehicle off the floor jack.
If you must work under a vehicle raised on a floor jack, always make sure that the vehicle
is safely supported on safety stands intended for that purpose that are strong enough to
support the weight of the vehicle.
Never use the floor jack as a ladder or step ladder.
Always make sure that the weight of the vehicle is not heavier than the lifting capacity of
the floor jack and safety stands being used.
NOTICE
To help prevent serious vehicle damage, never lift the vehicle by the engine oil pan,
transmission housing, or by the front or rear axles or suspension.
To help prevent damage to the underbody or chassis, always insert a rubber pad between
the hoist and the lifting points. In addition make sure the lifting arms have enough clearance.
The lifting arms should not touch side sills or other parts of the vehicle.
Loading ...
Loading ...
Loading ...