Loading ...
Loading ...
Loading ...
Deicing door lock cylinders
Please first read and note the introductory information and heed the WARNINGS
Volkswagen recommends using only genuine Volkswagen deicer spray with lubricating and anti-
corrosive properties to deice door lock cylinders.
NOTICE
Lock deicers that contain grease solvents can cause the lock cylinder to rust.
Undercoating
Please first read and note the introductory information and heed the WARNINGS
The vehicle underbody is coated to help protect it from corrosion and damage. The undercoating could
be damaged during normal use. We therefore recommend that you have the protective coatings on the
underbody and suspension inspected regularly, and repaired if necessary.
WARNING
Undercoating and rustproofing products can catch fire on the hot exhaust system or any
other hot engine component.
Never apply additional undercoating or rust proofing on or near the exhaust manifold, the
exhaust pipes, the catalytic converter, the heat shields, or any other hot vehicle component.
Cleaning the engine compartment
Please first read and note the introductory information and heed the WARNINGS
The engine compartment of a vehicle is a dangerous area ⇒ Working in the engine compartment.
If necessary, the engine compartment should be cleaned by an authorized Volkswagen dealer or
authorized Volkswagen Service Facility. Incorrect cleaning procedures could remove corrosion
protection and damage electrical components, among other things. In addition, water could enter
directly into the vehicle interior through the plenum chamber ⇒ .
Never use a power washer to clean the engine compartment ⇒ .
If the engine compartment is extremely dirty, have it cleaned professionally by your authorized
Volkswagen dealer or authorized Volkswagen Service Facility.
Plenum chamber
The plenum chamber is located in the engine compartment between windshield and engine, under a
perforated cover. Outside air is taken into the vehicle interior from the plenum chamber via the climate
control system.
Regularly remove leaves and other loose objects from the plenum chamber cover by hand or with a
vacuum cleaner.
Loading ...
Loading ...
Loading ...