Loading ...
Loading ...
Loading ...
The red zone at the end of the scale indicates maximum permissible engine rpm (revolutions
per minute) for all gears after the break-in period. Before reaching the red zone, select the next
higher gear or selector level position D, or ease your foot off the accelerator ⇒ .
(3) Displays, Displays, Displays.
(4) Reset button for the trip odometer display (trip).
– Push the button for about 1 second to reset to zero.
(5) Fuel gauge, Refueling.
(6) Button for setting the clock
1
.
– With the ignition on, push the button to highlight the hour or the minutes in the clock
display.
– To advance the clock, push the button
(4). Press and hold the button to fast forward.
– Push the button again to finish setting the clock.
(7) Engine coolant temperature display , Engine coolant.
NOTICE
To help prevent engine damage, always avoid high engine speeds, full throttle acceleration
and heavy engine loads when the engine is cold.
To help prevent engine damage, the tachometer needle should only enter the red zone
(warning zone) briefly.
Upshifting early into the next higher gear saves fuel and reduces engine noise.
Displays
Fig. 12 In the instrument cluster display: A: Open engine hood, B: Open luggage compartment lid, C: Open
driver door.
Please first read and note the introductory information and heed the WARNINGS
Depending on the vehicle model, different information may be shown in the instrument cluster display
⇒
fig. 11 (3).
Warning and information texts
1
On appropriately equipped vehicles, the clock can also be set via the Settings menu in the instrument
cluster display ⇒ page 24, Settings menu, ⇒ page 25, Settings menu.
Loading ...
Loading ...
Loading ...