Loading ...
Loading ...
Loading ...
Park Distance Control (PDC) with rear lid assist
Fig. 143 Park Distance Control sensors.
Please first read and note the introductory information and heed the WARNINGS
The Park Distance Control System sensors are in the rear bumper.
Park Distance Control does not work while the CSC roof is being opened or closed.
Switching the Park Distance Control (PDC) system on and off
In order to Operation
Automatically activate
PDC:
Shift into Reverse (R) when the ignition is on or engine is running.
On vehicles equipped with Rear Assist ⇒ the Rear Assist camera display
appears on the radio or the navigation system screen.
Manually deactivate
the display:
Press a function selection button on the radio or the navigation system
⇒ Booklet
Radio
or ⇒ Booklet
Navigation system
.
Automatically
deactivate PDC:
Shift out of Reverse (R). If the PDC display is activated, the display
switches off after about 10 seconds.
OR: Drive forward faster than about 5-10 mph (10-15 km/h).
A chime sounds to tell you that the system is on. If the chime does not sound, PDC is not working.
Have the system inspected by an authorized Volkswagen dealer or an authorized Volkswagen Service
Facility.
Special considerations when using Park Distance Control
In some cases, the Park Distance Control and rear lid assist interpret water and ice on the sensors
as an obstacle.
If the distance remains the same, the warning tone volume decreases after a few seconds. If a
continuous tone sounds, its volume remains the same.
If the vehicle moves away from the obstacle, the beeping sound stops automatically. The beep
turns on again automatically if the vehicle approaches the obstacle again.
For vehicles with automatic transmissions, there is no beeping when the transmission is in Park
(P).
Loading ...
Loading ...
Loading ...