Loading ...
Loading ...
Loading ...
CSP-170/CSP-150 Owner’s Manual
36
Assembly
2 Attach B.
1 Align the screw holes on the upper side of B with the
bracket holes on D and E, then attach the upper corners of
B to D and E by finger-tightening H (x 2).
2
Secure the bottom end of B using K (x 4).
3 Securely tighten H on the top of B that were attached in
Step 2- 1.
3 Mount A.
Be sure to place your hands at least 15 cm away from
either end of the bottom of A when positioning it.
CAUTION
Be extremely careful not to drop the main unit or let your fingers
be pinched by it. Do not hold A in any position other than the
position specified above.
4 Secure A.
1 Adjust the position of A so that the left and right ends of A
will project beyond D and E equally (as seen from the
front).
2 Secure A by tightening G (x 6) from the front.
5 Connect the pedal cord and power cord.
1 Insert the plug of the pedal cord into the pedal connector.
2 Attach the cord holders to the rear panel as shown, then clip
the cord into the holders.
Depending on the model of digital piano you purchased,
the surface color of one side of B may be different from the
other side. If so, position B so that the side similar in color
to D and E faces the player.
D
B
E
H
K
1 3
2
A
Align the screw holes.
At least 15 cm
Insert the pedal cord securely until
the metal part of the cord plug
disappears from view. Otherwise, the
pedal may not function properly.
A
A
1
G
2
2
3
1
4
Loading ...
Loading ...
Loading ...