Loading ...
Loading ...
Loading ...
CSP-170/CSP-150 Owner’s Manual
33
Connections
The FC4A or FC5 footswitches and the FC7 foot controller (sold separately) can be connected to
[AUX PEDAL] jack. A footswitch can be used for switching functions on and off, while a foot controller
controls continuous parameters such as volume. To assign the function to the connected pedal, refer to the
Pedal Setting in the Utility Menu in the Smart Pianist smart device app.
NOTE
Make sure to connect or disconnect the pedal only when the power is off.
The [MIC/LINE IN] jack (standard 1/4" phone jack) lets you connect a microphone, guitar, or other audio
equipment. Note that you need to select “MIC” or “LINE IN” depending on the connected equipment.
When the output level of the connected equipment (such as a microphone, guitar, bass) is low, set the
[MIC/LINE] switch to “MIC.” When the output level of the connected equipment (such as a synthesizer,
keyboard, CD player) is high, set the [MIC/LINE] switch to “LINE.”
1 Before turning on the power of the instrument, set the [INPUT VOLUME] knob to
the minimum position.
2 Connect the microphone or the guitar to the [MIC/LINE IN] jack.
NOTE
Make sure you have a conventional dynamic microphone.
3 Set the [MIC/LINE] switch to “MIC” or “LINE” depending on the instrument to be
connected.
4 Turn on the power of the Clavinova.
5 (If necessary, turn on the microphone) Adjust the [INPUT VOLUME] knob while
singing into the microphone or playing the guitar.
6 After you finish your performance, turn the [INPUT VOLUME] knob to minimum
before removing the microphone or the guitar.
7 Remove the microphone or the guitar from the [MIC/LINE IN] jack.
Connecting a footswitch/foot controller ([AUX PEDAL] jack)
Connecting a microphone or guitar ([MIC/LINE IN] jack, [MIC/LINE] switch)
Foot pedals
Footswitch
FC4A
Footswitch
FC5
Foot controller
FC7
Loading ...
Loading ...
Loading ...