Loading ...
Loading ...
Loading ...
(74,1)
北米Model "A8270BE-B" EDITED: 2019/ 12/ 9
! Tether anchorages
S01AG070102
The tether anchorages (upper an-
chorages) are provided at the locations
shown in the above illustration. For details,
refer to “Top tether anchorages” FP74.
! To install a child restraint system
using lower and tether an-
chorages
S01AG070103
WARNING
Before installing a child restraint
system, be sure to confirm that the
seatback is securely locked into
place. Otherwise, in an accident,
serious injury or death could result.
1. Shake the seatback slightly to confirm
that it is securely locked into place.
– Check the red colored unlocking
marker which is attached to the bottom
of the lock release knob is not visible.
For details, refer to “Folding down the
rear seatback” FP41.
2. There are “ ” marks at the bottom of
the rear seat seatbacks. These marks
indicate the positions of the lower an-
chorages (bars).
3. Peel off the anchorage cover from the
selected side of the rear seatback. Fold the
peeled anchorage cover in half and affix it
with hook and loop tape to expose the
anchorages (bars) to be used for installa-
tion of the child restraint system.
4. Remove the rear seat head restraint.
For details, refer to “Head restraints”
FP44.
CAUTION
Store the head restraint that has
been removed in the cargo area.
Avoid placing the head restraint in
the passenger compartment, as it
could be thrown around in the
passenger compartment in a sud-
den stop or a sharp turn.
Child restraint systems
72
Loading ...
Loading ...
Loading ...