Loading ...
Loading ...
Loading ...
(137,1)
北米Model "A8270BE-B" EDITED: 2019/ 12/ 9
Example
1) Press to lock
2) Press to unlock
NOTE
Make sure that you do not leave the key
inside the vehicle before locking the
doors from the outside using the power
door locking switches.
& Automatic door locking/un-
locking
S02AC08
All doors, rear gate and the fuel lid are
automatically locked or unlocked under
the following conditions.
. For automatic door locking
– When the vehicle speed reaches 12
mph (20 km/h) or higher (factory
default setting).
– When the select lever is shifted into
a position other than the “P” position.
. For automatic door unlocking
– When the driver’s door is open
(factory default setting).
– When the ignition switch is turned to
OFF.
– When the select lever is shifted into
the “P” position.
NOTE
. The user can change the automatic
door lock and unlock setting with the
combination meter. Refer to “Menu
screens” FP197.
. When locking the door by operating
power door locking switches, auto-
matic door locking will not operate.
. When unlocking the door by operat-
ing power door locking switches, auto-
matic door unlocking will not operate.
. When getting out of the vehicle from
a rear door, make sure to unlock all the
doors by pushing the unlock side of the
power door locking switch. If a rear
door is unlocked from the inside door
lever then the door is opened and
closed, the Key lock-in prevention
function will be triggered. All doors will
be unlocked, the Key lock-in prevention
warning indicator “
” will appear and
the warning chime will also sound.
& Key lock-in prevention func-
tion
S02AC06
Under the following conditions, all the
doors will not lock when the door lock
switch is pushed with the front door open.
. The key is still in the ignition switch
(models without “keyless access with
push-button start system”).
. The ignition switch is in the “ACC” or
“ON” position (models with “keyless ac-
cess with push-button start system”).
NOTE
. When leaving the vehicle, make sure
you are holding the key before locking
the doors.
. The factory setting (default setting)
for this function is set as “operational”.
This function’s operational/non-opera-
tional setting can be changed by a
– CONTINUED –
Door locks
135
2
Keys and doors
Loading ...
Loading ...
Loading ...