Loading ...
Loading ...
Loading ...
(488,1)
北米Model "A8270BE-B" EDITED: 2019/ 12/ 9
Type A
Type B
3. Disconnect the electrical connector
from the bulb and remove the bulb from
the headlight assembly by turning it
counterclockwise.
4. Replace the bulb. At this time, use care
not to touch the bulb surface.
5. To install the bulb to the headlight
assembly, turn it clockwise until it clicks.
6. Reconnect the electrical connector.
7. Put the air intake duct with the clips
(right-hand side).
8. Set the washer fluid filler pipe to the
original place and secure it with the clips
(left-hand side).
& Front position light (if
equipped)
S11BE56
The bulbs of the front position lights are the
same as the front turn signal lights. Refer
to “Front turn signal light” FP485 for the
replacement order.
& Front side marker light (if
equipped)
S11BE24
Right-hand side
1. Use a screwdriver to remove the clips
on the air intake duct, then remove the
duct.
Replacing bulbs
486
Loading ...
Loading ...
Loading ...