Loading ...
Loading ...
Loading ...
(324,1)
北米Model "A8270BE-B" EDITED: 2019/ 12/ 9
Type B
“L” is for using engine braking when going
down a hill, etc. To select this mode, move
the select lever from the “D” position to the
“L” position.
When selected, the indicator “L” will
illuminate on the combination meter.
To deselect “L”, move the select lever to
the “D” position.
& Shift lock function
S07BG04
The shift lock function helps prevent the
improper operation of the select lever.
. The select lever cannot be operated
unless the ignition switch is turned to the
“ON” position and the brake pedal is
depressed.
. The select lever cannot be moved from
the “P” position to any other position before
the brake pedal is depressed. Depress the
brake pedal first, and then operate the
select lever.
. Only the “P” position allows you to turn
the ignition switch from the “ACC” position
to the “LOCK”/“OFF” position and remove
the key from the ignition switch.
. If the ignition switch is turned to the
“ACC” position while the select lever is in
the “N” position, the select lever may not
be moved to the “P” position without
depressing the brake pedal and pressing
the select lever button.
! Shift lock release
S07BG0401
If the select lever cannot be operated, turn
the ignition switch back to the “ON”
position then move the select lever to the
“P” position with the select lever button
pressed and brake pedal depressed.
If the select lever does not move after
performing the above procedure, perform
the following steps.
. When the select lever cannot be
shifted from “P” to “N”:
Refer to “Shift lock release using the shift
lock release button” FP322.
. When the select lever cannot be
shifted from “N” to “R”, “P”:
After placing the ignition switch in the
“ACC” position, move the select lever to
the “P” position with the select lever button
pressed and brake pedal depressed.
If you must perform the above procedure,
the shift lock system (or the vehicle control
system) may be malfunctioning. Contact a
SUBARU dealer for an inspection as soon
as possible.
If the select lever does not move after
performing the above procedure, refer to
“Shift lock release using the shift lock
release button” FP322.
! Shift lock release using the shift
lock release button
S07BG0402
Perform the following procedure to release
the shift lock.
1. Apply the parking brake and stop the
Continuously variable transmission
322
Loading ...
Loading ...
Loading ...