Loading ...
Loading ...
Loading ...
77
appear on the screen. If you select [Yes], the
data will be transmitted to your phone. During
data transmission, the Bluetooth icon flashes.
<Bluetooth data storage folder>
You can check the received data by selecting Menu >
2. My Media > 6. Bluetooth data.
4. Device
<Connecting a headset>
1. Select Menu > 9. Settings > 5. Connectivity
> 1. Bluetooth
2. Connect the headset according to the procedures
described in the Pairing Devices section.
3. To use the headset, select the headset from the
registered devices, press the OK key [Connect].
<Connecting a handsfree kit>
1. Menu > 9. Settings > 5. Connectivity > 1.
Bluetooth
2. Connect the handsfree kit according to the
procedures described in the Pairing Devices
section.
3. To use the handsfree kit, select the handsfree kit
from the registered devices, then press the OK
key [Connect].
The
Bluetooth®
word mark and logos are owned by the Bluetooth
SIG, Inc. and any use of such marks by LG Electronics is under
license. Other trademarks and trade names are those of their
respective owners.
USB Connection Mode (Menu 9.5.2)
Select the desired USB connection mode.
Network (Menu 9.5.3)
Network selection
1. You can select either Automatic or Manual
network selection.
2. If you select Automatic, connection continues
according to the Automatic network selection
procedures. This setting is recommended for
best service and quality.
3. If you select Manual, all the currently 2G (GSM)
and 3G (UMTS) available networks are shown,
and you can select one of them for registration. If
the registration of the network has failed, then all
the currently available networks are listed again,
and you can select any other one for registration.
Settings
Note
TU500 does not support IrDA port.
Loading ...
Loading ...
Loading ...