Loading ...
Loading ...
Loading ...
Troubleshooting _63
Troubleshooting
PROBLEM SOLUTION
• Make sure the door is firmly closed.
• Make sure your washer is plugged in.
• Make sure the water faucets are open.
• Make sure to press the Start/Pause button to start your washer.
• Make sure Child Lock is not activated; see page 37.
• Before your washer starts to fill, it will make a series of clicking noises
to check the door lock and do a quick drain.
• Check the fuse or reset the circuit breaker
• Turn both faucets on fully.
• Make sure the door is tightly closed.
• Straighten the water inlet hoses.
• Disconnect the hoses and clean the hose filter screens. The hose
filter screens may be clogged.
• Open and close the door, then press the Start/Pause Button.
• Make sure your washer is running with sucient water pressure.
• Make sure the Detergent Selector dial is in the upper position when
using granular detergent.
• Make sure your washer is set on a level surface. If the surface is not
level, adjust your washer’s feet to level the appliance.
• Make sure that the shipping bolts are removed.
• Make sure your washer is not touching any other object.
• Make sure the laundry load is balanced.
• Plug the power cord into a live electrical outlet.
• Check the fuse or reset the circuit breaker.
• Close the door and press the Start/Pause Button to start your
washer.
For your safety, your washer will not tumble or spin unless the door is
closed.
• Before your washer starts to fill, it will make a series of clicking noises
to check the door lock and do a quick drain.
• There may be a pause or soak period in the cycle. Wait briefly to see
if it starts.
• Check the screens on the inlet hoses at the faucets for obstructions.
Clean the screens periodically.
WF457ARG-03153A-09_EN.indd 63 2014/4/30 15:17:49
Loading ...
Loading ...
Loading ...