Loading ...
Loading ...
Loading ...
Washing a load of laundry _39
Washer takes small amounts of water in tub and Heater heats water into evaporation.
To use the Steam function, perform the following steps:
1. Load the washer.
2. Press the Power button.
3. Turn the Cycle Selector and select a steam cycle. (The Deep Steam cycle automatically
selects the Steam Wash function.)
4. Press the Steam button.
5. Add detergent into the dispenser tray for a wash, and add fabric softener up to the marked
line.
6. Press the Start/Pause button.
: The washer automatically selects the optimal wash conditions by sensing the weight of the
laundry.
Steam may not necessarily be visible during the steam cycles.
Steam may not be present during entire steam wash cycle.
•
Too much steam could damage clothing. Do not use steam with delicate fabrics such as wool, silk
or easily discolored fabrics.
•
Steam may not be present during entire steam wash cycle.
•
Do not touch the door. The door surface can become very hot.
Controlling the brightness level
You can control the brightness level of the LCD panel. There are 5 brightness levels from Level 1
to Level 5. Even if the power is turned on and o repeatedly, the setting is retained.
Follow the steps below to control the brightness level.
1. Tap the Settings button in the
screen. The screen is displayed.
2. Tap the Display & Sound button in the
Settings screen.
3. Tap the Brightness section.
4. Tap the desired brightness level button.
5. Tap the OK button to apply the changes.
CAUTION
WF457ARG-03153A-09_EN.indd 39 2014/4/30 15:17:26
Loading ...
Loading ...
Loading ...