WF457ARGS User Manual

Loading ...

62_ Maintaining your washer

Maintaining your washer





Pure Cycle is a self-cleaning cycle that removes mold that may occur inside the washer.

1. Press the Power button.

2. Select the Pure Cycle.

• Once the Pure Cycle is chosen, the only function that can be set is Delay Start.

3. Press the Start/Pause button.

• When you press the Start/Pause button, the Pure Cycle begins.

• UsingthePureCycle,youcancleanthedrumwithoutusingacleaningagent.

• NeverusethePureCyclewhenlaundryisinthewasher.Itmaycausedamagetothe

laundry or a problem with the washer.

• 

 (When using a

powder-type cleaning agent , remove the liquid detergent compartment.)



• Ifcleaningthetub(drum)isrequired,thePureCycleautonoticationscreenappears.

When this remove the laundry from the washer, turn the power on, and clean the drum

by running the Pure Cycle.

• IfyoudonotrunthePureCycle,thePureCycleautonoticationscreenwillbeshown

again after two washes. Not running the Pure Cycle at this point will not cause a problem

with the washer.

• AlthoughthePureCycleautonoticationscreenappearsonceamonthorso,the

frequency may dier depending on the number of times the washer is used.

CAUTION

WF457ARG-03153A-09_EN.indd 62 2014/4/30 15:17:49

Loading ...

User Manual - Page 62