Loading ...
Loading ...
Loading ...
10 Maintenance and service
10
}}
381
WARNING
On cars with Xenon headlamps, the
replacement of Xenon lamps must be car-
ried out at a workshop - an authorised
Volvo workshop is recommended. Working
with Xenon lamps demands extreme cau-
tion because the headlamp is equipped
with a high voltage unit.
WARNING
The car's electrical system must be in key
position 0 for bulb replacement; see Key
positions - functions at different levels
(p. 81).
IMPORTANT
Never touch the glass part of the bulbs
with your fingers. Grease from your fingers
is vaporised by the heat, coating the
reflector and then causing damage.
NOTE
If an error message remains after the bro-
ken bulb has been replaced then we rec-
ommend that you visit an authorised Volvo
workshop.
NOTE
Outside lighting such as headlamps, fog
lamps and rear lamps may temporarily
have condensation on the inside of the
lens. This is normal, all exterior lighting is
designed to withstand this. Condensation
is normally vented out of the lamp housing
when the lamp has been switched on for a
time.
Related information
•
Lamp replacement - headlamps (p. 381)
•
Lamp replacement - location of rear
lamps (p. 385)
•
Lamp replacement - vanity mirror lighting
(p. 386)
•
Lamp replacement - lighting in cargo area
(p. 386)
•
Lamp replacement - number plate lighting
(p. 385)
Lamp replacement - headlamps
All of the headlamp bulbs are replaced via the
engine compartment. First loosen and remove
the whole headlamp.
Removing the headlamp
Set the car's electrical system in key position
0, see Key positions - functions at different
levels (p. 81).
Pull out the headlamp's locking pins.
Release the headlamp by alternately tilt-
ing and pulling it out.
IMPORTANT
Do not pull the electrical cable, only the
connector.
Loading ...
Loading ...
Loading ...