Loading ...
Loading ...
Loading ...
03 Instruments and controls
03
* Option/accessory, for more information, see Introduction.
125
Trip computer - trip statistics*
Information is stored about completed trips
containing average fuel consumption and
average speed, which can be viewed in the
centre console's screen as a bar chart.
Function
Trip statistics
29
Each bar symbolises 1 km or 10 km driven
distance, depending on the scale selected -
the bar at the far right shows the value for the
current kilometre or 10 km.
Using the TUNE control, the scale for the
bars can be changed between 1 km and
10 km - the cursor on the far right changes
position between up and down in relation to
the scale selected.
Operation
Different settings can be made in the menu
system MY CAR, see MY CAR (p. 114) -
there, find
Trip statistics.
With the "Reset when vehicle has been off
for minimum 4h" option highlighted, all sta-
tistics are deleted automatically once driving
is complete and the car has been stopped for
4 hours. Trip statistics start again from zero
the next time the engine is started.
•
Reset when vehicle has been off for
minimum 4h - highlight the box by
selecting ENTER and go back out of the
menu by selecting EXIT.
If a new driving cycle is started before
4 hours have elapsed then the current period
must first be deleted manually using the
"
Start new trip" option.
•
Start new trip - ENTER is used to delete
all previous statistics, go back out of the
menu by selecting EXIT.
See also information on Eco guide (p. 69).
Related information
•
Trip computer - supplementary informa-
tion (p. 124)
29
The figure is schematic - layout may vary depending on car model or updated software.
Loading ...
Loading ...
Loading ...