Loading ...
Loading ...
Loading ...
10 English
Important safety instructions
Important safety instructions
SAVE THESE INSTRUCTIONS SAVE THESE INSTRUCTIONS
CRITICAL CLEANING
INSTRUCTIONS
Do not clean the appliance by spraying water directly onto it.
Do not use benzene, thinner, or alcohol to clean the appliance.
• This may result in discoloration, deformation, damage, electric shock, or re.
Before cleaning or performing maintenance, unplug the appliance from the wall
socket and remove food waste from the door and cooking compartment.
• Failing to do so may result in electric shock or re.
Take care not to hurt yourself when cleaning the appliance inside and outside.
• You may hurt yourself on the sharp edges of the appliance.
Do not clean the appliance with a steam cleaner.
• This may result in corrosion.
Keep the inside of the oven clean. Food particles or spattered oils stuck to the
oven walls or oor can cause paint damage and reduce the efciency of the oven.
INSTALLING YOUR MICROWAVE
OVEN
Place the oven on a at level surface 33.5 inches (85 cm) above the oor. The
surface should be strong enough to safety bear the weight of the oven.
4 inches (10 cm)
behind
8 inches
(20 cm) above
4 inches
(10 cm) on
the side
33.5 inches
(85 cm) above
the oor
1. When you install your oven, make sure
there is adequate ventilation for your
oven by leaving at least 4 inches (10
cm) of space behind and on the sides of
the oven and 8 inches (20 cm) of space
above.
2. Remove all packing materials inside the
oven.
3. Install the roller and turntable. Check
that the turntable rotates freely.
(Turntable type model only. See page
12.)
4. This microwave oven must be positioned
so that the plug is accessible.
NOTE
A trim kit is available for select models (MS19M8020TG and MS19M8000AS).
The trim kit allows you install this microwave in a cabinet or any other built-in
application. For complete installation instructions, see the trim kit installation
manual.
MS19M8020TS_AA_DE68-04466A-01_EN.indd 10 2017-12-21 9:29:12
Loading ...
Loading ...
Loading ...