Loading ...
Loading ...
Loading ...
Making Embroidery Adjustments
E-28
Using the automatic thread cutting function
(END COLOR TRIM)
The automatic thread cutting function will cut the thread at
the end of sewing each color. This function is initially turned
on. To turn this function off, press key and then . This
function can be turned on or off during embroidering.
a
Press .
b
Press to turn off the automatic thread cutting
function.
→ The key will display as
• When one color thread is sewn, the machine will
stop without cutting the thread.
c
Press to return to the original screen.
Adjusting the embroidery speed
a
Press to display the following screen.
b
Change the “Max Embroidery Speed” by pressing
/.
c
Press to return to the original screen.
Changing the “Embroidery Frame Display”
a
Press to display the following screen.
b
In the “Embroidery Frame Display”, use / to
change the embroidery frame display mode.
Memo
• “spm” is the number of stitches sewn in one
minute.
• Decrease the embroidery speed when
embroidering on thin, thick, or heavy fabrics.
• The sewing speed can be changed after an
embroidery pattern has been started.
• The maximum embroidery speed setting does not
change until a new setting is selected. The setting
specified before the main power is set to OFF
remains selected the next time that the machine is
turned on.
• Decrease to a slower spm when using a special
thread like a metallic thread.
Loading ...
Loading ...
Loading ...