Loading ...
Loading ...
Loading ...
Specify Network Settings
108
Nighthawk AC1750 Smart WiFi Router
The user name is admin. The default password is password. The user name and
password are case-sensitive.
The BASIC Home screen displays.
4. Select ADV
ANCED > Setup > LAN Setup.
5. In the IP Address fields, type the IP address.
6. In the IP Subnet Mask fields, type the subnet mask of the router.
The IP address and subnet mask identify which addresses are local to a specific device
and which must be reached through a gateway or router.
7. Change the RIP settings.
Router Information Protocol (RIP) allows a router to exchange routing information with
other routers.
a. In the RIP Direction list, select one of the following:
• Both.
The router broadcasts its routing table periodically and incorporates
information that it receives.
• Out Only.
The router broadcasts its routing table periodically.
• In Only.
The router incorporates the RIP information that it receives.
b. In the RIP V
ersion list, select one of the following:
• Disabled.
This is the default setting.
• RIP-1.
This format is universally supported. It is adequate for most networks,
unless you use an unusual network setup.
• RIP-2.
This format carries more information. Both RIP-2B and RIP-2M send the
routing data in RIP-2 format. RIP-2B uses subnet broadcasting. RIP-2M uses
multicasting.
8. Click the Apply button.
Your changes are saved.
Loading ...
Loading ...
Loading ...