Loading ...
Loading ...
Loading ...
Specify Network Settings
104
Nighthawk AC1750 Smart WiFi Router
Disable LED Blinking or Turn Off LEDs
The router LEDs on the top panel indicate router activities and behavior. You can disable
LED blinking for network communications, or turn off all LEDs except the Power LED.
To disable LED blinking or turn off the LEDs:
1. Launch an Internet browser from a computer or wireless device that is connected to the
network.
2. T
ype http://www.routerlogin.net or http://www.routerlogin.com.
A login screen displays.
3. Enter the router user name and password.
The user name is admin.
The default password is password. The user name and
password are case-sensitive.
The BASIC Home screen displays.
4. Select ADV
ANCED > Advanced Setup > LED Control Settings.
By default, the first radio button is selected, which allows standard LED behavior. For
information about standard LED behavior
, see Table 1, LED and button descriptions on
page 10.
5. T
o disable blinking, select this radio button: Disable blinking on Internet LED, LAN LED,
Wireless LED, and USB LED when data traffic is detected.
6. T
o turn off the LEDs, select this radio button: Turn off all LEDs except Power LED.
7. Click the Apply button.
Your change takes effect.
View WAN Settings
You can view or configure wide area network (WAN) settings for the Internet port. You can
set up a DMZ (demilitarized zone) server, change the maximum transmit unit (MTU) size, and
enable the router to respond to a ping to its WAN (Internet) port.
To view the WAN settings:
1. Launch an Internet browser from a computer or wireless device that is connected to the
network.
Loading ...
Loading ...
Loading ...