Loading ...
Loading ...
Loading ...
75
Setting Display Status
Setting Up Functions from Menus
Selecting an Input Signal Type (COMPO-
NENT)
[Input signal select]
You can select a proper component signal
type, if a video image from AV equipment
is not projected correctly.
Press the OK button to accept your setting
and then press the MENU button.
• [Auto] is the factory default.
• Refer to the User's Manual of your AV
equipment connected to the projector to
confirm the component signal type.
Adjusting Input Signal (ANALOG PC) –
Total Dots
[Input signal settings] - [Total dots]
You can adjust the total number of dots in
the horizontal direction.
Adjust it when stripes are displayed on the
screen.
Use [<] / [>] to select a value.
When you have completed the adjust-
ment, press the MENU button.
• Perform this adjustment if the [AUTO
PC] function (P50) cannot adjust the
project image correctly.
• You can make adjustment either for
[ANALOG PC-1] or [ANALOG PC-2].
HDMI COMPONENT
DIGITAL PC
VIDEO
ANALOG PC
Input signal select
Display settings
HDMI COMPONENT
DIGITAL PC
VIDEO
ANALOG PC
Input signal settings
Display settings
Total dots
Loading ...
Loading ...
Loading ...