User Manual - Page 76

For NEW LEON 2020.

Loading ...
Loading ...
Loading ...
Operation
Since refuelling: Displ
ay and st
or-
age of the journey data and the con-
sumption values collected. When refuel-
ling, the memory is deleted.
Long-term: This memory contains trav-
el data up to a maximum of 19 hours and
59 minutes or 99 hours and 59 minutes,
or up to a maximum of 1999.9 km or
9999.9 km. When one of these values is
exceeded (varies depending on the ver-
sion of the instrument panel), the memo-
ry is deleted.
Delete journey data presets
When in Travel data select desired memo-
ry.
Hold the  button of the multifunction
steering wheel or the  button of the multi-
function wheel pressed down for about 2
seconds.
Select the instructions
In the Infotainment system, in the menu Vehi-
cle settings, you can display different travel
data
page 93.
Current consumption: The current
fuel consumption display operates
throughout the journey, in litres/100 km;
and with the engine running and the ve-
hicle stopped, in litres/hour.
Average consumption: The average
fuel consumption is displayed after driv-
ing for approximately 300 metres.
Travelling time: This indicates the
hours (h) and minutes (min) since the ig-
nition was switched on.
Range: Approximate distance in km that
can still be travelled if the same driving
style is maintained.
AdBlue range or : Approximate
distance in km that can still be travelled
with the current level of the AdBlue®
tank with the same driving style. The in-
dication appears from a range of less
than 2,400 km and cannot be deactiva-
ted.
1)
Distance: Distance covered in km (m)
after switching on the ignition.
Average speed: The average speed
will be shown after driving for approxi-
mately 100 metres.
Digital speed display: Current
speed displayed in digital format.
Eco tips: Recommendations messag-
es are shown to reduce consumption
through good driving practices, e.g. Air
conditioning on: close the win-
dow.
Oil and coolant temperature indication
(only with digital instrument panel)
The engine reaches its operating tempera-
ture when, under normal driving conditions,
the oil temperature is between 80°C (176°F)
and 120°C (248°F). If a great effort is required
from the engine and the outside temperature
is high, the engine oil temperature may in-
crease. This does not present any problem as
long as the warning lamps or
page 326 do not appear on the display.
Warning and information messages
(Vehicle status)
The system runs a check on certain compo-
nents and functions when the ignition is
s
wit
ched on and while the vehicle is moving.
Faults are displayed on the instrument cluster
display as red and yellow warning symbols
2)
accompanied by messages and, depending
1)
Not available in all countries.
2)
With an analogue instrument panel, the warn-
ings are al
ways shown in white.
74
Loading ...
Loading ...
Loading ...