Loading ...
Loading ...
Loading ...
358 STARTING AND OPERATING
To Cancel
The following conditions cancel the system:
• The brake pedal is applied.
• The CA
NC button is pushed.
• An Ant
i-Lock Brake System (ABS) event occurs.
• The gea
r selector is removed from the DRIVE position.
• The El
ectronic Stability Control/Traction Control System
(ESC/TC
S) activates.
• The vehicle parking brake is applied.
• Driver
seatbelt is unbuckled at low speeds.
• Driver
door is opened at low speeds.
• The br
aking temperature exceeds normal range (over-
heated
).
• A
Trailer Sway Control (TSC) event occurs.
• The ve
hicle speed is less than 15 mph (
24 km/h) (manual
transmission only).
• The clutch is depressed for more than ten seconds (manual
transm
ission only).
• The vehicle is placed in NEUTRAL for more than ten
second
s (manual transmission only).
To Turn Off
The system will turn off and clear the set speed in memory if:
• The Adaptive Cruise Control (ACC) on/off button is
pushed
.
• The Normal (Fixed Speed) Cruise Control on/off button is
pushed
.
• The ignition is turned OFF.
• You swi
tch to Four-Wheel Drive Low.
To Resume
If there is a set speed in memory push the RES (resume)
button and then remove your foot from the accelerator pedal.
The instrument cluster display will display the last set speed.
NOTE:
• If your vehicle stays at standstill for longer than two
second
s, then the system will cancel and the brake force
will be ramped-out. The driver will have to apply the
brakes to keep the vehicle at a standstill.
• ACC cannot be resumed if there is a stationary vehicle
in-fro
nt of your vehicle in close proximity.
Loading ...
Loading ...
Loading ...