Loading ...
Loading ...
Loading ...
STARTING AND OPERATING 323
NOTE:
In the event of a mismatch between the gear selector position
and the
actual transmission gear (for example, driver selects
PARK while driving), the position indicator will blink
continuously until the selector is returned to the proper posi
-
tion, or the requested shift can be completed.
The electronically-controlled transmission adapts its shift
s
chedule
based on driver inputs, along with environmental
and road conditions. The transmission electronics are
self-calibrating; therefore, the first few shifts on a new
vehicle may be somewhat abrupt. This is a normal condition,
and precision shifts will develop within a few hundred miles
(kilometers).
Only shift from DRIVE to PARK or REVERSE when the
accelera
tor pedal is released and the vehicle is stopped. Be
sure to keep your foot on the brake pedal when shifting
between these gears.
The transmission gear selector provides PARK, REVERSE,
NEUTRAL,
DRIVE and MANUAL (AutoStick) shift posi-
tions. Manual shifts can be made using the AutoStick shift
c
ontrol.
Toggling the gear selector forward (-) or rearward
(+) while in the MANUAL (AutoStick) position (beside the
DRIVE position) will manually select the transmission gear,
and will display the current gear in the instrument cluster.
Refer to "AutoStick" in this section for further information.
Gear Selector
NOTE:
If the gear selector cannot be moved to the PARK, REVERSE,
or NEUTR
AL position (when pushed forward), it is prob-
ably in the AutoStick (+/-) position (beside the DRIVE posi-
tion). In AutoStick mode, the transmission gear (1, 2, 3, etc.)
i
s displ
ayed in the instrument cluster. Move the gear selector
to the right (into the DRIVE [D] position) for access to PARK,
REVERSE, and NEUTRAL.
5
Loading ...
Loading ...
Loading ...