User Manual - Page 340

For 2019 Wrangler.

Loading ...
Loading ...
Loading ...
338 STARTING AND OPERATING
Axle Lock (Tru-Lok) — Rubicon Models
The AXLE LOCK switch is located on the instrument panel
(to the right of the steering column).
Axle Lock Switch Panel
This feature will only activate when the following conditions
are met:
Ignition in RUN position, vehicle in 4L (Low) range.
Vehicle
speed should be 10 mph (1
6 km/h) or less.
Both right and left wheels on axle are at the same speed.
To acti
vate the system, push the AXLE LOCK switch down
to lock t
he rear axle only (the “REAR ONLY will illumi-
nate), push the switch up to lock the front axle and rear axle
(
the “FRO
NT + REAR” will illuminate). When the rear axle
is locked, pushing the bottom of switch again will lock or
unlock the front axle.
NOTE:
The indicator lights will flash until the axles are fully locked
o
r unloc
ked.
To unlock the axles, push the AXLE LOCK OFF button.
Axle lock will disengage if the vehicle is taken out of 4L
(Low) ran
ge, or the ignition switch is turned to the OFF posi-
tion.
The axle lock disengages at speeds above 30 mph (48 km/h),
a
nd will
automatically re-lock once vehicle speed is less than
10
mph (16 km/h).
Loading ...
Loading ...
Loading ...