Loading ...
Loading ...
Loading ...
GETTING TO KNOW YOUR VEHICLE 31
• Push the lock button on the exterior Passive Entry Door
Handle with a valid key fob available in the same exte-
rior zone (refer to "Keyless Enter-N-Go — Passive
E
ntry" i
n "Getting To Know Your Vehicle" for further
information).
• Push the lock button on the key fob.
3. If a
ny doors are open, close them.
To Disarm The System
The vehicle security alarm can be disarmed using any of the
following methods:
• Push the unlock button on the key fob.
• Grasp
the Passive Entry Unlock Door Handle (if equipped,
refer
to "Keyless Enter-N-Go — Passive Entry" in "Getting
To Know Your Vehicle" for further information).
• Cycle the vehicle ignition system out of the OFF position.
NOTE:
• T
he driver's door key cylinder cannot arm or disarm the
vehicl
e security alarm.
• When the vehicle security alarm is armed, the interior
power d
oor lock switches will not unlock the doors.
The vehicle security alarm is designed to protect your
vehicle
. However, you can create conditions where the
system will give you a false alarm. If one of the previously
described arming sequences has occurred, the vehicle secu
-
rity alarm will arm regardless of whether you are in the
v
ehicle
or not. If you remain in the vehicle and open a door,
the alarm will sound. If this occurs, disarm the vehicle secu
-
rity alarm.
If the vehicle security alarm is armed and the battery
becomes
disconnected, the vehicle security alarm will
remain armed when the battery is reconnected; the exterior
lights will flash, and the horn will sound. If this occurs,
disarm the vehicle security alarm.
Rearming Of The System
If something triggers the alarm, and no action is taken to
disarm it, the vehicle security alarm will turn the horn off
after 29 seconds, 5 seconds between cycles, up to 8 cycles if
the trigger remains active and then the vehicle security alarm
will rearm itself.
2
Loading ...
Loading ...
Loading ...