Loading ...
Loading ...
Loading ...
SAFETY 261
3. Allow the seat belt to retract. As the seat belt retracts, you
will hear a clicking sound. This indicates the seat belt is
now in the Automatic Locking Mode.
How To Disengage The Automatic Locking Mode
Unbuckle the combination lap/shoulder belt and allow it to
retract
completely to disengage the Automatic Locking
Mode and activate the vehicle sensitive (emergency) locking
mode.
Supplemental Restraint Systems (SRS)
Some of the safety features described in this section may be stan-
dard equipment on some models, or may be optional equipment
on others
. If you are not sure, ask an authorized dealer.
The air bag system must be ready to protect you in a collision.
The Occup
ant Restraint Controller (ORC) monitors the internal
circuits and interconnecting wiring associated with the electrical
Air Bag System Components. Your vehicle may be equipped
with the following Air Bag System Components:
Air Bag System Components
• Occupant Restraint Controller (ORC)
• Air Bag
Warning Light
• Steerin
g Wheel and Column
• Instrum
ent Panel
• Knee Im
pact Bolsters
• Driver
and Front Passenger Air Bags
• Seat Be
lt Buckle Switch
• Supplem
ental Side Air Bags
• Front an
d Side Impact Sensors
• Seat Be
lt Pretensioners
WARNING!
• The seat belt assembly must be replaced if the switch-
able Au
tomatic Locking Retractor (ALR) feature or any
other sea
t belt function is not working properly when
checked according to the procedures in the Service
Manual.
• Failure to replace the seat belt assembly could increase
the ris
k of injury in collisions.
• Do not use the Automatic Locking Mode to restrain
occupant
s who are wearing the seat belt or children
who are using booster seats. The locked mode is only
used to install rear-facing or forward-facing child
restraints that have a harness for restraining the child.
4
Loading ...
Loading ...
Loading ...