Loading ...
Loading ...
Loading ...
104
Trouble?
• ACCESS ERROR
• DISC ACCESS FAILURE
CHECK THE DISC
There was an error when reading the disc or attempting to write
onto it. Try cleaning the disc or replace it.
108
This message can also appear if condensation has formed. Wait
until the camcorder dries completely before resuming use.
110
The disc may not be loaded correctly. Try removing the disc and
reinserting it.
26
DISC COVER IS OPEN Verify the disc is correctly inserted and close the disc cover. 26
NO DISC No disc is loaded. Insert a disc. 26
This message can also appear if condensation has formed. Wait
until the camcorder dries completely before resuming use.
110
LOADING THE DISC The disc is being read. Wait before you start recording. –
AVOID MOVING THE
CAMCORDER
Try not to move the camcorder while the image is being recorded. –
UNABLE TO RECOVER
DATA
Could not recover a corrupted file. –
This message can also appear if condensation has formed. If you
suspect condensation is the reason, do not initialize the disc and
wait until the camcorder dries completely before resuming use.
110
DISC FULL The disc is full (“ END” flashes on the screen). Delete some
recordings (DVD-RW in VR mode) to free some space or replace
the disc.
26
69
TASK IN PROGRESS
DO NOT DISCONNECT
THE POWER SOURCE
The camcorder is updating important file allocation data on the disc.
Do not disconnect the compact power adapter or remove the
battery pack.
–
NO CARD Memory card not is inserted into the camcorder. 28
NO IMAGES No images are recorded on the memory card. –
CARD ERROR A memory card error occurred. The camcorder cannot record or
display the image.
If the message disappears after 4 seconds and “ ” flashes red,
turn the camcorder off, remove the card and reinsert the card. If
“ ” changes to green, you can continue recording/playback.
–
CARD FULL Memory card is full. Erase some images to free some space or
replace the memory card.
73
THE CAMCORDER IS SET
TO STILL IMAGE MODE
You pressed the Start/Stop button while recording still images
( mode).
–
NAMING ERROR The folder and file numbers have reached their maximum value.
Set the [FILE NOS.] option to [RESET] and initialize the disc or
memory card, erase all the images on the memory card or replace
the disc.
–
OPERATION CANCELED There was a problem with the disc or memory card while copying
still images between them.
–
TRANSFER ORDER
ERROR
You attempted to set more than 998 transfer orders. 91
Message Explanation
D119_NTSC-E.book Page 104 Monday, December 18, 2006 10:14 AM
Loading ...
Loading ...
Loading ...