User Manual - Page 6

For BP6200PHEMEAV1. Also, The document are for others Braun models: BP 6000, BP 6100, BP 6200

Loading ...
Loading ...
Loading ...
6
Do not inate the monitors cu when it is not wrapped around the arm.
Do not attempt to disassemble or change any parts of the monitor including the cu.
Do not drop the product or put it through strong impact.
The device is not supposed to be used if your arm has any wound or injury.
Choosing the Right Cu
For accurate measurement, it is important to choose the correct size cu which best ts your upper
arm. Choose the cu size according to your arm circumference and make sure the bottom of the cu is
2~3cm above your elbow.
Small/Medium Cu = 22~32cm arm circumference
Large/XLarge Cu = 32~42cm arm circumference
Applying the arm cu
1. Slide the end of arm cu furthest from the tube through the metal ring to a loop.
The smooth cloth should be on the inside of the cu.
Index
Fig. 5
Left arm
Main
arteries
Fig. 4
Pile side material
Velcro
Smooth
cloth
Metal ring
Fig. 6
2. If the cu is located correctly, the velcro will be on the outside of the cu and the metal ring will
not touch the skin (Fig. 4).
3. Put your left arm through the cu loop. The bottom of the cu should be approximately (2~3 cm)
above elbow. The tube should lie over the brachial artery on the inside of the arm (Fig. 5).
Fig. 8Fig. 7
Adult cu
22~32 cm / 32~42 cm
OKOK
Index
4. Pull the cu so that the top and bottom edges are tightened around your arm (Fig. 6).
5. When the cu is positioned properly, press the Velcro rmly against the pile side of the cu.
6. This cu is suitable for use if the <<index>> mark falls within the <<ok range>> marked by two
arrows when the cu is tightened around your arm (Fig. 7).
7. Sit on a chair and place your arm on the table so that the cu is at the same level as your heart
(Fig. 8).
Loading ...
Loading ...
Loading ...