Loading ...
Loading ...
Loading ...
97
Front Panel≫ Rear Panel≫ Remote≫
Contents
≫
Connections
≫
Playback
≫
Setup
≫
Manual MCACC
EQ Adjust
If you perform Full Auto MCACC then settings are automatic, but you can also
adjust the output volume of the range of each connected speaker to suit your own
preferences. You can adjust the volume of the dierent sound ranges for each
of the speakers. You can set three dierent equalizers in Preset 1 to 3. You can
select up to 4 bands for the Subwoofer and 9 bands for all other speakers.
Setting Item Default Value Setting Details
Front Left 0 dB After selecting the speaker frequency from between
"63 Hz" and "16 kHz" with the cursors / , adjust
the volume of that frequency between "-12.0 dB"
and "+12.0 dB" with / .
• "63 Hz" can only be selected when this speaker
is set to "Large" in "System Setup" - "Speaker" -
"Crossover".
Center 0 dB After selecting the speaker frequency from between
"63 Hz" and "16 kHz" with the cursors / , adjust
the volume of that frequency between "-12.0 dB"
and "+12.0 dB" with / .
• "63 Hz" can only be selected when this speaker
is set to "Large" in "System Setup" - "Speaker" -
"Crossover".
• If an item cannot be selected even though
connection is correct, check that the settings in
"System Setup" - "Speaker" - "Conguration"
- "Speaker Channels" matches the number of
connected channels.
Front Right 0 dB After selecting the speaker frequency from between
"63 Hz" and "16 kHz" with the cursors / , adjust
the volume of that frequency between "-12.0 dB"
and "+12.0 dB" with / .
• "63 Hz" can only be selected when this speaker
is set to "Large" in "System Setup" - "Speaker" -
"Crossover".
Setting Item Default Value Setting Details
Height Left 0 dB After selecting the speaker frequency from between
"63 Hz" and "16 kHz" with the cursors / , adjust
the volume of that frequency between "-12.0 dB"
and "+12.0 dB" with / .
• "63 Hz" can only be selected when this speaker
is set to "Large" in "System Setup" - "Speaker" -
"Crossover".
• The setting cannot be changed if "Zone 2" is set
in "Conguration" - "Zone Speaker" and Zone 2
is on.
• If an item cannot be selected even though
connection is correct, check that the settings in
"System Setup" - "Speaker" - "Conguration"
- "Speaker Channels" matches the number of
connected channels.
Height Right 0 dB After selecting the speaker frequency from between
"63 Hz" and "16 kHz" with the cursors / , adjust
the volume of that frequency between "-12.0 dB"
and "+12.0 dB" with / .
• "63 Hz" can only be selected when this speaker
is set to "Large" in "System Setup" - "Speaker" -
"Crossover".
• The setting cannot be changed if "Zone 2" is set
in "Conguration" - "Zone Speaker" and Zone 2
is on.
• If an item cannot be selected even though
connection is correct, check that the settings in
"System Setup" - "Speaker" - "Conguration"
- "Speaker Channels" matches the number of
connected channels.
Loading ...
Loading ...
Loading ...