VSX-933 Instruction Manual

Loading ...

124

Front Panel≫ Rear Panel≫ Remote≫

Contents

≫

Connections

≫

Playback

≫

Setup

≫

 Multi-zone function (for compatible models only)

❏ Cannot ZONE-output the audio of externally connected AV components

• To output audio from an externally connected AV component to ZONE 2, use an analog audio cable for connection.

• The audio from externally connected AV components can only be output when the audio is analog signal.

( p36)

❏ Others

• If the audio signal is from the NET or USB input selector, zone output is not possible for DSD and Dolby TrueHD audio signals.

 Remote Controller

• Make sure that the batteries are inserted with the correct polarity.

• Insert new batteries. Do not mix di󰀨erent types of batteries, or old and new batteries.

• Make sure that the sensor of the main unit is not subjected to direct sunlight or inverter-type uorescent lights. Relocate it if necessary.

• If the main unit is installed in a rack or cabinet with colored-glass doors, or if the doors are closed, the remote controller may not work normally.

• After operating the Multi-zone function (for compatible models only), the remote controller mode may be switched to the mode for operating the

ZONE output audio. Check "Multi-zone”, and switch the remote controller mode to the mode for controlling the main room.

( p64)

 Display

❏ The display does not light up

• When the Dimmer function is working, the display may go dim or turn o󰀨 (for compatible models only). Press the DIMMER button, and change the

brightness level of the display.

( p7)

 Others

❏ Strange noise can be heard from the unit

• If you have connected another device to the same outlet as this unit, strange noise may occur under the inuence of the device. If the symptom is

remedied by removing the power plug of the other device from the outlet, use di󰀨erent outlets for this unit and the device.

❏ The message "Noise Error" appears during Full Auto MCACC

• This can be caused by a malfunction in your speaker unit. Check the speaker output, etc.

Loading ...

Instruction Manual - Page 124