Loading ...
Loading ...
Loading ...
7
Contents
≫
Connections
≫
Playback
≫
Setup
≫
Front Panel≫ Rear Panel≫ Remote≫
1. INPUT SELECTOR dial: Switch the input to be played.
2. MCACC indicator: This lights when you have enabled the speaker calibration
made with MCACC. ( p96, p113)
3. FL OFF indicator: This lights when you have pressed DIMMER repeatedly to
turn the display o.
4. DIMMER button: You can switch the display o or adjust the brightness of the
display in three steps.
5. ZONE 2-ON/OFF button: Switches the multi-zone function on/o. ( p65)
6. ZONE 2-CONTROL button: Controls the multi-zone function. ( p65)
7. HOME MENU button: Displays the Home. ( p80, 95, 100)
8. Display ( p8)
9. Cursor buttons ( / / / ) and ENTER button: Select the item with the
cursors and press ENTER to conrm. Use them to tune to stations when using
TUNER. ( p59)
10.
NETWORK indicator: This lights when "NET" is selected with the input selector
and the unit is connected to the network. If the unit is in standby mode, this
lights when functions such as HDMI CEC and network standby are enabled. It
does not light when ZONE 2 is on, however.
11.
WIRELESS indicator: Lights when the unit is connected to the wireless
network and when connected to a BLUETOOTH enabled device.
12.
Remote control sensor: Receives signals from the remote controller.
• The signal range of the remote controller is within about 16´/5 m, at an
angle of 20° on the perpendicular axis and 30° to either side.
13.
RETURN button: Returns the display to the previous state.
14.
MASTER VOLUME
15.
STANDBY/ON button
16.
PHONES jack: Headphones with a standard plug (Ø1/4"/6.3 mm) are
connected.
17.
MCACC SETUP MIC jack: The supplied speaker setup microphone is
connected.( p96, p113)
18.
Listening mode button: Press "AUTO/DIRECT", "SURROUND" or "STEREO"
to switch the listening mode. ( p66)
19.
SOUND RETRIEVER button: Turns on/o the Sound Retriever function that
provides better sound quality for compressed audio.
20.
PURE DIRECT button: Switches to the Pure Direct mode. ( p66)
21.
USB port: A USB storage device is connected so that music les stored in it
can be played. ( p49) You can also supply power (5 V/500 mA) to USB
devices with a USB cable.
22.
AUX INPUT jack: Connect a mobile music player, etc. using a stereo mini plug
cable (φ1/8″/3.5 mm).
Loading ...
Loading ...
Loading ...