Loading ...
Loading ...
Loading ...
10
Contents
≫
Connections
≫
Playback
≫
Setup
≫
Front Panel≫ Rear Panel≫ Remote≫
1. DIGITAL AUDIO IN OPTICAL/COAXIAL jacks: Input TV or AV component
digital audio signals with a digital optical cable or digital coaxial cable.
2. ANTENNA AM LOOP/FM UNBAL 75Ω terminal: The supplied antennas are
connected.
3. VIDEO IN jacks: Input the AV component video signals with an analog video
cable.
4. USB port: A USB storage device is connected so that music les stored in it
can be played. ( p49) You can also supply power (5 V/500 mA) to USB
devices with a USB cable.
5. COMPONENT VIDEO IN jacks: Input the AV component video signals with a
component video cable. (Compatible only with 480i or 576i resolution.)
6. NETWORK port: Connect to the network with a LAN cable.
7. Wireless antenna: Used for Wi-Fi connection or when using a BLUETOOTH
enabled device. Adjust their angles according to the connection status.
8. HDMI OUT jacks: Transmit video signals and audio signals with a HDMI cable
connected to a TV.
9. HDMI IN jacks: Transmit video signals and audio signals with a HDMI cable
connected to an AV component.
10.
Power cord
11.
SIGNAL GND terminal: The ground wire of the turntable is connected.
12.
AUDIO IN jacks: Input AV component audio signal with an analog audio cable.
13.
SPEAKERS terminals: Connect speakers with speaker cables. (North
American models support banana plugs.)
14.
ZONE 2 LINE OUT jacks: Output audio signals with an analog audio cable
connected to a pre-main amplier in a separate room (ZONE 2).
15.
SUBWOOFER PRE OUT jack: Connect a powered subwoofer with a
subwoofer cable. Up to two powered subwoofers can be connected. The same
signal is output from each of the SUBWOOFER PRE OUT jacks.
Loading ...
Loading ...
Loading ...