Loading ...
Loading ...
Loading ...
7
8. Lock Basket Handle into place by inserting handle
into loops on Basket. Then with some pressure,
carefully force Basket Handle Bars around the
clasp on the Basket.
5. Attach Shelf Brackets
to Side Shelf and Fryer
using 4 Small Hex Bolts/W
ashers.
Side Shelf
with Brackets
Underneath
Side Shelf
4. Attach 2 Acorn Nuts on Shelf Side of Fr
yer
as shown below. Then Slide Side Shelf onto
Acorn Nuts on side of Fryer Wall.
Side Shelf on
Fryer Wall
Side of Fryer for Shelf
Exhaust vent MUST be attached to the RIGHT opening on back panel so that exhaust flows
AW
AY from burner intake and AWAY from the person lighting the burner.
WARNING
6. (a) Check to verify that all connections on the pre-assembled
Gas Inlet/Jet Burner are screwed together tightly
.
Attach the GAS INLET to the LEFT opening on back
of Fryer using 4 Short Hex Bolts/Washers/Nuts.
(b) Attach EXHAUST VENT to RIGHT opening on back
of Fryer using 2 Long Hex Bolts/Washers/Nuts.
Attach REGULATOR HOSE ASSEMBLY with GAS INLET
COVER to GAS INLET using pre-attached Hex Bolts/Nuts.
(b)
(a)
Acorn Nuts attach to Fryer Wall
7. Screw Drain Valve onto Fr
yer Body. Wrench tighten.
NOTE: When Attaching Drain Valve, make sure that the
Locking Tab for Handle is positioned towards
the Fryer Body.
Side of
Fryer W
all
ON RIGHT
SIDE
ON LEFT
SIDE
EXHAUST VENT
GAS INLET/JET BURNER
9. Attach Regulator Hose Assembly to Brass Connector
on Gas Inlet/Jet Bur
ner
. Refer to pages 8 - 9.
Downloaded from www.ManualsFile.com manuals search engine
Loading ...
Loading ...
Loading ...