Loading ...
Loading ...
Loading ...
THERMOMETER TEST INSTRUCTIONS
2-STEP METHOD for Thermometer Testing
1. TEMPERATURE ACCURACY
:
While wearing protective gloves, hold the thermometer by the dial and insert stem into boiling water.
The needle should quickly move around the dial and register approximately 212°F (100°C)
(plus or minus 5°F). This indicates whether or not temperature reading is accurate.
NOTE: Due to water evaporation, the max reading possible on a thermometer in hot water is 212°F (100°C).
2. TEMPERATURE RANGE:
Hold thermometer by the dial and place end of the stem above a lit match or lighter. The needle
should quickly move around the dial and register a temperature reading far above 350°F. If the needle
stops at a low temperature reading such as 225°F; then the thermometer is damaged and cannot be
used. Discard the thermometer and order a replacement thermometer (Model #5070).
If you are uncertain about any aspect of testing or operating you fryer:
Call 1-800-864-6194 Monday - Friday, 8am - 5pm CST for assistance.
10
1. Test the thermometer to insure it accurately measures temperature
as shown above.
2.
Before installing thermometer, make sure the rubber gasket
is located on stem of thermometer underneath brass nut.
3. Insert Thermometer into hole on front of fryer.
Make sure the thermometer face is in the
upright position. Gently turn the brass nut
clockwise until thermometer is secure.
4. Using wrench provided, tighten brass nut
of thermometer until it is tightly secured to Fryer Stem.
5. After attaching thermometer
, check to make sure thermometer needle is pointing near actual outside
ambient temperature number.
F
I
R
E
H
A
Z
A
R
D
200
350
150
100
250
50
50
150
400
°C
750
°F
TURN
OFF
GAS
400
10
Upright Position
RUBBER
GASKET
BRASS
NUT
THERMOMETER ATTACHMENT INSTRUCTIONS
CAUTION
DO NOT tighten top nut on stem. Tightening the top nut will also turn the dial
and the temperature calibration will be compromised.
The thermometer supplied with your fryer is Model #5070. It is a sensitive measuring device which may
not work properly if dropped, bent, or twisted.
T
o order a replacement ther
mometer, call 1-800-864-6194, M - F 8am - 5pm CST for assistance.
You should test your thermometer before you install it into your fryer.
Always use a thermometer when frying any food products. DO NOT attempt frying if the thermometer
is not working. Always check to be sure thermometer is working properly BEFORE fr
ying.
DANGER
Downloaded from www.ManualsFile.com manuals search engine
Loading ...
Loading ...
Loading ...