Loading ...
Loading ...
Loading ...
4
3. Screw Drain Valve onto Fryer Body. Wrench tighten.
NOTE: When Attaching Drain Valve, make sure that
the Locking Tab for Handle is positioned towards
the Fryer Body.
1 - Exhaust Vent
1 - Hex Wrench
4. Lock Basket Handle into place by inserting handle
into loops on Basket. Then with some pressure,
carefully force Basket Handle Bars around the clasp
on the Basket.
ASSEMBLY INSTRUCTIONS
READ ALL SAFETY WARNINGS
& ASSEMBLY INSTRUCTIONS CAREFULLY BEFORE ASSEMBLING OR OPERATING
YOUR FRYER. Inspect contents in the box to ensure all parts are included and undamaged.
FOR MISSING PARTS OR ASSISTANCE, PLEASE CALL 1-800-864-6194 M-F 8am - 5pm CST.
Proof of purchase will be required.
TOOLS REQUIRED:
Adjustable Wrench
PARTS INCLUDED:
Model #700-725
1 - Fryer Body
1 - Stainless Steel
Basket
2 - Extension Legs
1 - Thermometer
Wrench
1 - Thermometer
1 - Drain Hose
Thermometer Wrench,
provided
5. Attach Regulator Hose Assembly to Brass Connector
on Gas Inlet/Jet Burner
. Refer to pages 8 - 9.
Exhaust vent MUST be attached to the LEFT
opening on back panel so that exhaust
flows A
W
AY from burner intake and AWAY
from the person lighting the burner.
WARNING
Hex Wrench, provided
2 - Long Hex Bolts/Washers/Nuts
for Heat Exhaust
4 - Short Hex Bolts/Washers/Nuts
for Gas Inlet
4 - Large Hex Bolts/Washers/Nuts
for either Extension Legs or Short Legs
2. (a) Attach EXHAUST VENT
to LEFT opening on back
of Fryer using 2 Long Hex Bolts/Washers/Nuts.
Check to verify that all connections on the pre-assembled
Gas Inlet/Jet Burner are screwed together tightly.
(b) Attach the GAS INLET to RIGHT opening on back
of Fryer using 4 Short Hex Bolts/Washers/Nuts.
Attach REGULATOR HOSE ASSEMBLY with GAS INLET
COVER to GAS INLET using pre-attached Hex Bolts/Nuts.
(a)
ON LEFT
SIDE
4 - Short Legs
1. Attach LEGS to base of fryer:
(a)
Freestanding application: Slide Extension Legs into holes on
the Fryer. Attach using the 4 Large Hex Bolts/Washers/Nuts.
-OR-
(a) Tabletop application: Slide 4 Short Legs into holes on
the Fryer. Attach using the 4 Large Hex Bolts/Washers/Nuts.
(a)
(b)
This fryer must be operated with
either the shor
t or long legs attached.
WARNING
OR
EXHAUST VENT
2.5-Gal. Fryer
(b)
ON RIGHT
SIDE
GAS INLET/JET BURNER
ASSEMBLY INSTRUCTIONS
READ ALL SAFETY WARNINGS
& ASSEMBLY INSTRUCTIONS CAREFULLY BEFORE ASSEMBLING OR OPERATING
YOUR FRYER. Inspect contents in the box to ensure all parts are included and undamaged.
FOR MISSING PARTS OR ASSISTANCE, PLEASE CALL 1-800-864-6194 M-F 8am - 5pm CST.
Proof of purchase will be required.
1- Regulator
Hose Assembly
with Gas Inlet Cover
1 - Gas Inlet/Jet Burner
Downloaded from www.ManualsFile.com manuals search engine
Loading ...
Loading ...
Loading ...