Loading ...
Loading ...
Loading ...
The essentials
on battery). Failure to comply could result in
an explo
sion.
●
Never use jump leads when one of the bat-
teries is frozen. Danger of explosion! Even af-
ter the battery has thawed, battery acid could
leak and cause chemical burns. If a battery
freezes, it should be replaced.
●
Keep sparks, flames and lighted cigarettes
away from batteries, danger of explosion.
Failure to comply could result in an explo-
sion.
●
Observe the instructions provided by the
manufacturer of the jump leads.
●
Do not connect the negative cable from the
other vehicle directly to the negative terminal
of the flat battery. The gas emitted from the
battery could be ignited by sparks. Danger of
explosion.
●
Do not attach the negative cable from the
other vehicle to parts of the fuel system or to
the brake line.
●
The non-insulated parts of the battery
clamps must not be allowed to touch. The
jump lead attached to the positive battery
terminal must not touch metal parts of the ve-
hicle, this can cause a short circuit.
●
Position the leads in such a way that they
cannot come into contact with any moving
parts in the engine compartment.
●
Do not lean on the batteries. This could re-
sult in chemical burns.
Note
The vehicles must not touch each other, oth-
erwi
se electricity could flow as soon as the
positive terminals are connected.
Changing windscreen wipers
Winds
creen wipers service position
Fig. 77 Wipers in service position
The wiper arms can be raised when the wip-
er
s
ar
e in service position ››› Fig. 77.
●
Close the bonnet ›››
page 268.
●
Switch the ignition on and off.
●
Press the windscreen wiper lever down-
wards briefly ››› page 26
4
.
B
ef
or
e driving, always lower the wiper arms.
Using the windscreen wiper lever, the wind-
screen wiper arms return to their initial posi-
tion.
››› page 87
Changing the front wiper blades
Fig. 78 Changing the front wiper blades
Fig. 79 Changing the rear wiper blade
54
Loading ...
Loading ...
Loading ...