Loading ...
Loading ...
Loading ...
Checking and refilling levels
Refilling AdBlue
Fig. 236 At the rear left of the luggage com-
p
ar
tment: AdBlue t
ank, behind a cover panel
Fig. 237 AdBlue tank with filler neck cap and
r
efi
l
ling bottle
To refill AdBlue, the vehicle must be on flat
gr
ou
nd and not, f
or example, parked on a
kerb or slope. If the vehicle is not on flat
ground then the filling indicator cannot
measure the filling quantity.
Opening the tank filling neck
●
Open the rear lid.
●
Rotate the shut off on the cover clockwise
››› Fig. 236 and open the cover forwards.
●
Unscrew the tank filler neck cap ››› Fig. 237
1
anticlockwise.
R
efi
l
ling AdBlue
Only use AdBlue that is approved by SEAT
and that complies with ISO 22241-1 Stand-
ard. Only use genuine bottles.
●
Observe the instructions and information
provided by the refill bottle manufacturer.
●
Observe the expiry date.
●
Unscrew the cap on the refill bottle.
●
Place the refill bottle
2
upside down in-
s
ide the t
ank
filler neck.
●
Press the refill bottle against the filler neck
and keep in this position.
●
Add at least 5.0 litres of AdBlue (6 bottles).
A lower quantity would be insufficient.
●
Wait until the contents of the refill bottle
have been poured into the AdBlue tank. Do
not crush or damage the bottle!
●
Unscrew the liquid bottle anticlockwise and
remove it carefully ›››
.
●
You can tell when the AdBlue tank is full
bec
au
se the bottl
e will be empty.
»
267
Technical dataAdviceOperationEmergenciesSafety
Loading ...
Loading ...
Loading ...