Loading ...
Loading ...
Loading ...
Lights and visibility
Switch-
ing off:
– Disconnect the on button.
– OR: turn the lights control to a different po-
sition to
››› page 128.
– OR: place the turn signal and main beam
lever in the headlight flasher or main beam
position ››› page 129.
The following conditions can cause the head-
light adju
stment to fail to turn off the main
beam or fail to do so in time:
●
On roads with insufficient lighting with very
reflective signs
●
If road users are insufficiently lit up, e.g.
pedestri
ans or cyclists.
●
On closed curves, when the traffic in the
opposite direction is partially hidden, on pro-
nounced slopes
●
On roads with traffic in the opposite direc-
tion and with a central reservation barrier
where the driver can see through gaps or
over it e.g. lorry drivers.
●
If the camera is damaged or if the power
supply has been cut off
●
In the event of fog, snow or heavy rain
●
In the event of dust or sand storms
●
If the windscreen is damaged by the impact
from a stone in the camera's field of vision
●
If the camera's field of vision is misted up,
dirty or covered by a sticker, snow or ice.
WARNING
The greater comfort that the headlight ad-
justment
provides (automatic also) must not
cause you to take risks. The system is not a
replacement for driver awareness.
●
Always monitor the lights yourself and ad-
just them depending on the light, visibility
and traffic conditions.
●
The headlight adjustment (automatic also)
may not correctly detect all situations and in
certain situations may only provide limited
function.
●
If the windscreen is damaged or modifica-
tions are made to the vehicle lighting, this
may harm the functioning of the headlight
adjustment (automatic lights also), for exam-
ple, if additional headlight are fitted.
Note
Main beam and flashed headlights can be
turned on and off m
anually at any time with
the turn signal and main beam lever
››› page 129.
“Coming home” and “Leaving home”
f
u
nction (guid
ance lights)
The “Coming home” function should be
sw
it
c
hed on manually. However the “Leav-
ing home” function is automatically control-
led by a photo sensor.
“Coming home”: necessary operations
To switch
system on:
– Switch off the ignition.
– Briefly flash the headlights for approxi-
mately one second ››› page 129.
The “Coming home” lighting comes on
when the driver door is opened. The delay
in switching off the headlights is counted
from when the last door or boot hatch is
closed.
To switch
system off:
– Automatically at the end of the delay pe-
riod.
– Automatically, if 30 seconds after com-
ing on, a vehicle door or the boot hatch re-
mains open.
– When the light switch is turned to posi-
tion
.
– When the ignition is switched on.
“Leaving home”: necessary operations
To switch
system on:
– Unlock the vehicle when the light switch
is in position
and the photo sensor
detects darkness.
To switch
system off:
– Automatically, at the end of the delay
period.
– When the vehicle is locked.
– When the light switch is turned to posi-
tion
.
– When the ignition is switched on.
Lighting around the exterior mirrors
The lightin
g ar
ou
nd the exterior mirrors illu-
minates the door area on entering and leav-
ing the vehicles. It comes on when the vehi-
cle is unlocked, when the vehicle door is
»
131
Technical dataAdviceOperationEmergenciesSafety
Loading ...
Loading ...
Loading ...